Ready-Made Outdoor Steps: The Options

If you’re thinking about installing outdoor wooden steps in your garden, you may be wondering what your options are. Pressure-treated pine is a popular choice for outdoor wooden steps because it’s durable and weather-resistant. Pressure-treated wood arrives wet with a preservative, so you need to allow it to dry before applying any finishing products. You can apply a waterproofing stain or exterior porch and deck paint after it has dried completely.

Ready Made Garden Steps

Whether you’re looking for a simple or elaborate garden step, the choices are many. There are many types of materials and designs available to suit your garden and personal taste. For an elegant, traditional feel, timber is a good option. It’s versatile and works well as both the tread and riser of steps. Alternatively, a more modern design could be built from timber posts and rails. Whatever the style, a well-designed set of steps will add beauty to any garden, as well as safety.

When choosing the type of steps you want, make sure you carefully mark the area in which you want them. You may want to use marking paint or a chalk measuring tool. You can also use wooden stakes to get accurate levels. You can finish the top of the steps by using a variety of materials, including decorative stones, gravel, or paving slabs. Or, for a sleeker finish, consider outdoor tiles or wooden planks.

Ready Made Outdoor Wooden Steps

When deciding on paint for your outdoor wooden steps, there are several options available. Exterior-grade paint is recommended for wood steps, as it won’t peel or expand when the temperature changes. It can also be tinted to match your home’s paint scheme, and you won’t need to purchase specialized equipment to get the job done. The paint used on these steps will also protect your home’s exterior from the elements.

Exotic woods are also available. Hard maple is a creamy-white color, with a slight reddish tinge. Its straight grain makes it a durable choice for landings. Walnut heartwood is a light to dark brown color. It is the most expensive variety, but it isn’t always available. You can always paint it, but the dark wood will show the stain better.

Ready Made Steps For Decking

When buying Ready Made Outdoor Steps for your decking project, you need to consider your decking design, as well as the material used. Cedar treads give your steps a more refined look than other wood species. This type of wood lasts almost as long as treated lumber, and smooth cedar is slightly softer and has a rich red tint. The downside to cedar is that it is difficult to stain, so make sure you use treated screws to attach it to the deck subframe. Rough cedar is not the strongest framing material, but it works well with most oil-based paints.

After purchasing your Steps, you must fit them into place. To attach a stringer to the subframe of your decking, you should drill an over-sized pilot hole and screw in a NeoTimber coloured trim screw. A second drill hole is needed to install the stringer connector. You can do this behind the deck subframe if your step is not anchored to the subframe. Once the step framework is installed, you can fix the NeoTimber deck board on it.

Outdoor Step Kits

A stair kit is a pre-fabricated kit that includes the necessary parts to create a set of stairs. The kit typically includes the stringers, risers, and treads.

If you’re looking for a quick, low-cost way to install outdoor steps, consider purchasing a kit from a company that specializes in creating custom staircases. This type of outdoor step kit is made of pressure-treated pine, which is highly durable and will last for many years. It will arrive wet, but you can apply a waterproofing stain or exterior porch and deck paint to finish the look.

To install the steps, cut the stringers to match the height of the entry joists and stringers. Then nail the bottom riser to the bottom stringer with three 8d galvanized nails. Make sure to cut the top two stringers one-half inch smaller than the previous step, to accommodate the riser boards. You should cut the middle two stringers one-half-inch shorter than the other two, to allow for the thickness of the anchor board.